TPU Fabrics A Storage Dan Leh Fimkhur Dan

TPU (thermoplastic polyurethane) puan hi thawmhnaw, bag, leh pawn lam thil siamah te hman a ni nasa hle a, a chhan chu abrasion resistance tha tak, tui laka invenna, thawk hahdamna, leh boruak tichhe lo a nih vang a ni. Mahse, a dah dik loh chuan TPU fabric performance emaw, a lan dan emaw a tichhe thei a, hei hi environment factor vang a ni. Chuvangin a quality vawng reng tur chuan dahkhawmna dik a pawimawh hle.

1. Storage Environment mamawh te
Temperature Control a ni

TPU puan hi temperature-sensitive a ni. Hun rei tak temperature sang (eg, 40℃aia sang)-a dah chuan thil chu a ti nem thei a, a ti chhe thei a, a hmin thei bawk a, temperature hniam (eg, -20℃hnuai lam ) erawh chuan a ti chhe thei a, a flexibility a nghawng thei bawk. A tha ber chu, dahna temperature chu 10℃leh 30℃inkarah dah tur a ni a, temperature inthlak danglamna nasa tak awm loh nan.

Humidity enkawl dan tur

Humidity sang tak awmna hmunah chuan TPU puan te hian awlsam takin tui a hip lut thei a, hei hian an taksa thiltihtheihna a nghawng thei a, chu chu abrasion resistance tihtlem leh mold siam te a ni. Storage atana relative humidity rawt chu 40% leh 60% inkar a ni. Humidity a san chuan desiccant emaw dehumidifier emaw hmang thin ang che.

Ventilation Condition hrang hrang

TPU fabric hian chemical resistance engemaw chen nei mahse, airtight, unventilated environment-a hun rei tak a awm chuan material degradation a ti chak thei a ni. Thli tleh theihna hmunah dah la, boruak lum, khuh emaw boruak kal tha lo emaw ah dah loh tur a ni.

II. Thil dahkhawm dan tur
Ni êng direct tak chu pumpelh rawh

TPU puan hi UV rei tak a awm chuan a sen emaw a chhe thei emaw a ni. Chuvangin hmun thim takah dah tur a ni a, chu chu opaque packaging-ah emaw, hmun lum leh thim takah emaw dah tur a ni. Display atan chuan UV-protective packaging hman a tha.

Compression leh folding tih loh tur

TPU fabric hian elasticity engemaw chen nei mah se, rei tak pressure rit tak emaw, folding dik lo emaw chuan crease, crack, emaw permanent deformation a thlen thei a ni. I dahkhawm dawnin thil hrual (sharp object) nena inhnaih loh nan puan chu a flat emaw, roll-ah emaw dah tum ang che.

Mimal Packaging siam a ni

Thil dang (plastic leh rubber ang chi) nena chemical reaction awm loh nan emaw, rimchhia a lakluh loh nan TPU puan chu a siamtu original packaging-ah emaw, well-sealed polyethylene (PE) bag-ah emaw a hranin dah a tha. Stacking a tul chuan layer inkar ah non-woven fabric emaw soft interlayer emaw dah la, friction damage tih tlem nan.

III. Fimkhur tur bik
Chemical atanga hla takah awm rawh

TPU fabrics hi acid chak tak, base chak tak, leh organic solvent (gasoline leh alcohol ang chi) te hian a nghawng thei a, chu chuan surface dissolution emaw performance degradation emaw a thlen thei a ni. Chutiang chemical chu dahna hmunah chuan tawk lo la, a bungrua chu a seal tha em tih enfiah bawk ang che.

Inspection neih fo thin

TPU puan rei tak dahkhawmte chu a rawng a danglam, a sticki, a mold, a taksa a chhiat loh enfiah fo tur a ni. Harsatna a awm chuan storage condition siamrem emaw, siamthat nghal tur emaw a ni.

Hun rei tak dah loh tur

TPU puan hi a nghet hle nachungin, hun rei tak (eg, kum khat aia tam) hman a nih loh chuan, a inthlak danglam theih nan boruak luh tir emaw, a hun hunah (eg, quarterly) zawi zawia hrual emaw a tha.

IV. Khaihtawi

TPU puan dahkhawmna atana pawimawh ber chu temperature leh humidity control a ni a, light leh chemical attack laka invenna tur a ni a, ventilation leh flat surface neih reng a ni. Heng step te zawm hian an dam chhung hi a ti rei thei a, an performance pawh a nghawng lo tih a tichiang thei bawk. Industrial inventory emaw, mimal khawlkhawm emaw pawh nise, TPU puan quality vawn thatna atana thil pawimawh tak a ni.